Gel Satin Topcoat has been a long-time favorite finish of woodworkers, with a heavy-duty oil-and-urethane base that produces a beautiful, hand-rubbed look. Gel Satin Topcoat has a thick consistency, so there are no drips or runs.

Also available in .

Don't forget your  and !

[TABS]

Specs

Product Color: Dries Amber
Base Type: Oil
Ambering: Yes
Sheen: Satin (25-35)
Interior or Exterior: Interior only
Type: Oil & Urethane
Coats: 3 coats
Application Method: Brush, Roll
Usable over existing finishes: Yes
Sprayable: No
Dry Time - Touch: 8 hr
Dry Time - Recoat: 12-24 hr raw wood, 72 hr existing finish until non-tacky. (Add more time with subsequent coats.)
Dry Time - Light Use: 7-10 days
Dry Time - Cure: 30 days
Coverage: 50-75 sq. ft.
Viscosity: Thick
Durability (Highest, High, Medium, Low): Highest

Directions

1. Work in a well-ventilated area. Open windows and doors, or use other means, to maintain fresh air flow during application and drying.
2. Stir thoroughly. Even though General Finishes Gel Topcoat is thick, be sure to stir it well to reincorporate solids that have settled to the bottom of the can.
3. 3 coats of topcoat are recommended. Apply thin coats with a cotton cloth, natural bristle or foam brush, staining pad or pad applicator with smooth, even strokes. Avoid heavy pressure & back-brushing. The larger the surface the larger the applicator needed. Additional coats will not improve durability.
4. Wipe off the excess evenly with the grain & with light pressure using a clean cloth or high-quality absorbent paper towel.
5. Finish sand between coats with a 220-320-grit foam sanding sponge or '0000' steel wool. Do not sand final coat.
6. Remove dust with a vacuum, tack cloth or clean water dampened rag before re-coating.

[/TABS]